ML series impact sand making machine

Tell us what you are looking for?

Name:*

Email:*

Phone:*

The Location of the Project:

Material:*
Please fill in the Material Limestone Basalt Calcite Dolomite Gravel Pebble Barite Coal Feldspar Granite Slag Bentonite Copper Gypsum Quartz Others

Capacity(TPH):*

Message:*

We hate SPAM too.

Technical Advantages

1. Less finished needles
   High quality products have a better market. Processed by VSI Sand making machine, the stone materials are mostly cubic, with less needle pieces, uniform particle size and reasonable grading, which can meet the demand of high standard materials.
2. Structure upgrade, economic rationality
   The VSI Sand making machine adopts deep cavity impeller, which can increase the throughput by 30%, and is equipped with a protective plate which can turn up and down, which can effectively prolong the service life of the whole machine. The design of combined throwing head only needs to replace the worn part in case of wear, which can greatly reduce the use cost.
3. High automation and labor saving
   The whole machine integrates the advanced intelligent control system, which can realize the remote operation of shutdown, adjustment, start, alarm and other operations, realize less manual operation, and greatly reduce the cost of manual management.
4. Realize green operation
   Equipped with professional dust removal, noise reduction and spray devices, it can effectively reduce the dust and noise pollution during operation and ensure the demand of green operation.

Working Principle

It is equipped with two different crushing methods of "stone beating stone" and "stone beating iron", which can ensure that the crushing function of vertical shaft impact sand making and shaping machine is more comprehensive. The former is more conducive to stone shaping, while the latter is more suitable for stone crushing and processing. Working principle: the motor drives the main shaft of the drive part of the bearing barrel to rotate at a high speed, and the rotor moves at a high speed with the main shaft. The stone material inside the impeller is accelerated and sprayed into the crushing chamber, and collides with the lining material formed in the crushing chamber, so as to achieve a good purpose of stone shaping and crushing. Working principle of "stone beating iron": after the stone is ejected from the rotor, it collides with the impact plate installed in the crushing chamber. The energy obtained from stone processing can be converted into the energy required for impact crushing with the impact plate, so as to achieve the purpose of rapid crushing, and then the broken stone can be discharged from the lower part of the body.

Specification Parameters

Remarks: The output is the approximate throughput measured based on the medium hardness materials. The actual results will be different due to the difference in feed, particle size, rock type and material moisture content