MD Series Multi-Cylinder Hydraulic Cone Crusher

Tell us what you are looking for?

Name:*

Email:*

Phone:*

The Location of the Project:

Material:*
Please fill in the Material Limestone Basalt Calcite Dolomite Gravel Pebble Barite Coal Feldspar Granite Slag Bentonite Copper Gypsum Quartz Others

Capacity(TPH):*

Message:*

We hate SPAM too.

Technical Advantages

1. Structural optimization design
   Fixed axis structure design, large crushing force, small equipment foundation investment. Laminated crushing cavity design, uniform product size, cube, low energy consumption.
2. Automatic intelligent control
   PLC + touch screen automatic control system to ensure the safe operation of the equipment.
3. Easy operation of discharge
   The hydraulic motor adjusts the discharge port, which is easy to operate.
4. Easy to maintain and use
   There is no need of filler in rolling day wall, so it is convenient to replace. All parts can be disassembled and assembled from the top and side, which is convenient for equipment maintenance. Hydraulic lubrication combined oil station, small volume, simple wiring.

Working Principle

When working, the belt wheel or coupling, the transmission shaft and the conical part are driven by the rotation of the motor to make the eccentric shaft swing periodically under the axis line. After the material enters the crushing cavity from the material mouth, it will be crushed because of the mutual impact, extrusion, grinding and rubbing between the eccentric shaft and the rolling mortar wall. The hydraulic insurance system can eliminate the fault objects of the support sleeve and the fixed cone by hydraulic pressure when the machine has iron fault or stuffy car. It plays a good role in insurance and greatly reduces the maintenance rate and improves the production efficiency.

Specification Parameters

Remarks: The output in the table is based on the approximate throughput measured by the loose density of the material at 1600KG/m3. The actual result will be different due to the difference in feed, particle size, rock type and material moisture content.